Hydraulic presses
Other products
Access Hydraulic presses 's products
Access selection
Back to Lifting equipments
Bench and workshop presses
• Single acting cylinder, spring return (except 100 T press: double acting cylinder)
• Horizontally adjustable cylinder on PRD models
• Height adjustable work table
• Mechanical work table winch (depending on model: see chart below)
• Frame incorporated pressure gauge
• Scale in kg/cm2 and in tons
• Pressure relief valve to prevent from overload
• Manual extension screw (except 100T press)
• Fixing holes
• In compliance with European directive 2006/42/CE
• These presses also exist with air hydraulic pump (see Air hydraulic or electric powered presses)
• Presses with electric pumps: on request
PRD 30
PRS 15
| Capacity
(Tons) |
Type | Cylinder | Hand pump | Winch | Reference | Dimensions (mm) | Weight
(kg) |
|||||||||||
| R1 : hydraulic stroke
(mm) |
R2 : extension
screw (mm) |
Bore diameter
(mm) |
Oil flow
(cm3/pump stroke) |
A | B | C | D | E | M | G1 | G2 | |||||||
| mini | maxi | |||||||||||||||||
| LP | HP | |||||||||||||||||
| 15 | Bench | 95 | 75 | 60 | 2.3 | PRS 15 | 550 | 350 | 800 | 132 | 430 | 45 | 338 | 48 | ||||
| 20 | Workshop | 120 | 75 | 60 | 7.6 | 2.3 | PRC 20 | 670 | 488 | 1850 | 132 | 530 | 21 | 858 | 106 | |||
| 30 | Workshop | 120 | 75 | 75 | 7.6 | 2.3 | PRC 30 | 670 | 488 | 1850 | 132 | 530 | 17 | 854 | 112 | |||
| 30 | Workshop | 120 | 75 | 75 | 7.6 | 2.3 | * | PRD 30 | 890 | 490 | 1900 | 150 | 720 | 212 | 84 | 770 | 147 | |
| 50 | Workshop | 120 | 75 | 97 | 7.6 | 2.3 | PRC 50 | 670 | 488 | 1850 | 132 | 530 | 66 | 766 | 145 | |||
| 50 | Workshop | 120 | 75 | 97 | 7.6 | 2.3 | * | PRD 50 | 890 | 490 | 1900 | 150 | 720 | 189 | 84 | 770 | 191 | |
| 100 | Workshop | 250 | 130 | 19 | 2.5 | * | K-100 | 1200 | 715 | 2050 | 260 | 975 | 115 | 915 | 620 | |||
Set of two «V-blocks»
Included in each press
Option : Set of 7 punches
[Diameters : 12-16-18-20-22-25-30]
For presses until 50 T included
Reference : MA-7
